Teltonika RUTX11

A next generation 4G/LTE router supporting speeds up to 300Mbps download and 50Mbps upload (LTE-A CAT6).


Our most powerful and feature-rich device, the RUTX11 is equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces.

RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.

Get Router Pricing Talk to an Expert

RUTX11 Typical Use Cases

The Teltonika RUTX11 is ideal for many applications including – CCTV,  Digital Signage and many Telemetry applications.

Router Description

The RUTX11 is a next generation 4G/LTE router supporting speeds up to 300Mbps download and 50Mbps upload (LTE-A CAT6). The router also supports failback to DC-HSPA+ technology with up to 42Mbps download and 5.76Mbps upload.

A Quad-core ARM Cortex A7 processor clocked at 717 MHz with 256MB RAM and 256MB flash provide excellent performance and provides ample space for customers to develop their own bespoke IoT applications to run on the router, allowing edge processing of data before transmission to Cloud-based IoT platforms. An integrated Bluetooth BLE transmitter allows Bluetooth enabled IoT sensors to be interrogated by the router, transmitting to their cloud platform via custom or built-in MQTT protocols.

The RUTX11 includes Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps. Dual-band WiFi operating on both 2.4 and 5GHz allows legacy devices to connect on 2.4GHz, while modern devices can operate on the faster 5GHz 802.11ac technology. The integrated 4-port 10/100/1000 Gigabit Ethernet Switch allows wire-speed failover with Gigabit leased-line primary Internet connections. Larger external 4G antennas can be installed on to the SMA female connectors if required. Please see our related products below for additional antenna options.

Link Resilience with Ping Reboot
The ability for a 4G/LTE router to maintain its’ Internet connection is often over looked, but this ability is essential if the router is going to be installed in unmanned locations or areas where access to equipment is difficult. The Teltonika ‘Ping Reboot’ automatically reboots itself if the router goes offline for a configurable level of time. This feature eliminates the need to visit site to reboot the router if there have been temporary cell mask issues or intermittent levels of network coverage.

The router also supports SMS status and Reboot commands that allow the router to be interrogated for current signal level or rebooted via SMS. These powerful remote diagnostic tools could prevent a site visit by an engineer, lowering maintenance costs.

Features, specification and accessories

  • LTE Cat 6 with speeds up to 300Mbps
  • 4 x Gigabit Ethernet ports with speeds up to 1000Mbps
  • Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps
  • Bluetooth low energy (LE) for short range communication
  • High processing power, Quad Core ARM Cortex A7 717 MHz CPU
  • Dual SIM for network resilience in high availability applications
  • Teltonika Remote Management System compatible
  • Connection watchdog
  • 3 alternative internet sources
  • Durable aluminium housing
  • Wide voltage range (9-50V) DC
  • External temperature range (-40 +75 °C)
  • Multiple VPN options (IPSec, DMVPN, OpenVPN)
  • Advanced firewall functionality
  • Advanced WiFi encryption

Frequency Band support

4G (LTE-FDD)B1, B3, B5, B7, B8, B20, B28, B321
4G (LTE-TDD)B38, B40, B41
3GB1, B3, B5, B8
2GNot supported


Mobile4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMA
CPUQuad Core ARM Cortex A7 717 MHz CPU
Memory256 MB SPI Flash, 256 MB of DDR3 RAM
Ethernet3 x LAN ports 10/100/1000 Mbps, 1 x WAN port (can be configured to LAN) 10/100/1000 Mbps
WiFi802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)
Power supply9 – 50 VDC, 4 pin DC connector
PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
Connectors1 x 4 pin DC, 4 x Ethernet, 2 x SMA for LTE, 2 x WiFi RP-SMA, 1 x SMA for GNNS, 1 x RP-SMA for Bluetooth
SIM2 x external SIM holders
Status LEDs 1 x Power, 3 x Mobile connection type, 5 x Mobile connection signal strength LEDs, 2 x WiFi band, 8 x Ethernet status, 4 x WAN type LEDs
Operating temperature -40 °C to 75 °C
HousingFull aluminium with grounding screw
Dimensions 115 mm x 95 mm x 44 mm


Operating system RutOS (OpenWrt based Linux OS)
SIM switch  2 SIM cards, auto-switch cases: data limit, roaming, no network, network denied, data connection fail
Multiple PDN Possibility to use different PDNs for multiple network access and services
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, Telnet
Networking featuresNAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Unique networking features VLAN, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto Failover
Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
AuthenticationPre-shared key, digital certificates, X.509 certificates
Keep settingsUpdate FW without losing current configuration
Monitoring & ManagementWEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMS
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided

1. Standard Antenna
For office-based installations, the standard supplied antennas are often adequate. If the router is installed in a metal comms cabinet signal can be affected.  Consider one of the other optional antennas if the router is installed in a comms cabinet.

2. Optional CMO Antenna
Through-hole surface mount CMO MIMO antenna for routers installed in a secure or waterproof enclosure or comms cabinet. Can be supplied with 0.5m cable to reduce cable loses and maintain the best possible signal.

3. Optional Magnetic Mount Antenna
For sites that have poor 4G coverage we can supply high gain LMO MIMO antenna available with 5m or 10m high quality RF240 antenna cables.  Includes wall and pole mounting brackets in the box.

4. Optional LMO Antenna
High gain LMO MIMO antenna available with 5m, 10m or 15m high quality RF240 antenna cables for sites with poor 4G coverage.

SIMPro – IoT’s most powerful SIM Management Platform

Our connectivity management platform provides a single window to securely manage your routers across any network and any number of deployments.

Deploy and manage assets quickly and easily

Optimise costs and pre-empt issues through powerful insights

Automate your connectivity using our powerful APIs

Unified and flexible billing for all business structures

Explore SIMPro

Remote Management System (RMS)

The RUTX11 4G/LTE router supports the Teltonika Remote Management System (RMS). A monthly subscription allows you to take control of your router portfolio, monitoring signal levels and device activity through a central management system, lowering your TCO.

View other Routers

Teltonika RUT240

Compact, robust and powerful device tailored for Industrial M2M/IoT applications. With 2 x Ethernet and Wireless interfaces. Hotspot functionality.

Use Cases:
» Digital Signage
» Telemetry applications

Features and Specification

Teltonika RUT950

Equipped with Dual-SIM, 4 x Ethernet interfaces and WiFi. Main/Backup Internet source with high data throughput and data redundancy.

Use Cases:
» Digital Signage
» Telemetry applications

Features and Specification

Teltonika RUT955

Equipped with Dual-SIM, 4 x Ethernet with VLAN functionality, WiFi and RS232, RS485, USB interfaces and multiple Inputs/Outputs.

Use Cases:
» Telemetry applications
» Energy monitoring

Features and Specification

Teltonika RUTX09

This powerful LTE router is designed as Main/Backup Internet source where steady connection and high data throughput is required.

Use Cases:
» Internet Failover/4G backup
» Satellite offices/branches
» Layer 2 Internet

Features and Specification


Dual SIM, 2 x Ethernet ports, is a compact IP M2M high performance low-cost broadband router designed for LTE Cellular networks.

Use Cases:
» Business Continuity/ Failover
» Mobile/Remote Office
» Primary Cellular connectivity

Features and Specification


A hardened LTE edge router designed for utilities. Automatic Failover with traffic load sharing between wireline and wireless links.

Use Cases:
» Power Grid Monitoring
» Substation

Features and Specification

Your next step…

Talk to our specialist Hardware and Router team about your connected router requirements or complete the form below.

Get Router Pricing Talk to an Expert

Call us today on 0330 056 3300.

Wireless Logic

Keep up-to-date
The latest IoT news and insights straight to your inbox!

      If you'd like to be kept informed of our news and industry updates please tick the box below: