The EN2000™ supports high-availability in fixed or portable locations by supplementing traditional broadband networks like DSL, cable, or MPLS/Ethernet with a high-speed LTE connection.
When programmed for failover, the EN2000™ detects hardwire network failures and seamlessly switches to LTE as programmed, keeping the network online. With standards based VRRP, the EN2000™ can support automatic failover and failback when the original connection comes back online.
The EN2000™ M2M router provides multiple VPN tunnels and VLAN support as well as VRRP with no additional licensing fees. It can also be set up to broadcast traffic to multiple operation centres using traffic shaping ensuring maximum performance, while also reporting alarms to a NOC. The EN2000™ can also operate as a stand-alone cellular solution to support a branch office or location. With the high speeds offered by cellular LTE networks normal business can be conducted without terrestrial connections.
This makes the EN2000™ an ideal choice for new construction, temporary branch offices or primary internet while awaiting terrestrial installation. The EN2000™ can be enabled with optional WiFi which can be used to further enhance the local network.
Exceptional features at a reasonable price
The EN™ series of cellular routers provides powerful features at a value price. The EN2000™ is the flagship of this series and offers exceptional value. All the EN™ series routers come with a three-year hardware warranty, an intuitive GUI interface, built in Firewall, VPN support and advanced IP features including DMNR, GRE, and IPsec.
In addition, all of the EN™ Series routers can be monitored and managed with Encore’s enterprise management system enCloud™. enCloud™ offers many features that will make managing your entire network of EN™ Series routers easier, including Cellular data limit enforcement for individual devices and group data plans, included firmware updates, no touch deployment for new hardware, and reseller and customer tiers to assist in delivering managed network services for multiple customers.
Cloud Management available with enCloud™ Enterprise Management System
Features, specification and accessories
- Dual SIM
- Supports both wireless and wired transport
- License free, VRRP, DMNR, GRE and IPSec
- VPN (tunnel, NAT-T, and Dead Peer Detection)
- Dual-band 2.4/5GHz 802.11a/b/g/n WiFi
- Two Ethernet ports, either LAN/LAN or WAN/LAN
- Small Footprint, Low Power Consumption
- Enhanced traffic grooming using QoS
- Data Traffic types can be assigned to specific links, IP addresses
- Distributed Enterprise Support for a variety of networks providing ‘always on’ service
- Connection watchdog
|General features||Broadband RouterSecure VPN router |
QoS enforcement to prioritize critical traffic
|Security appliance features||Stateful inspection layer 4 firewall, NAT, NAT Port Forward |
SSH (Secure Shell)
IPsec with AES 256 and 3DES 4 tunnels max
Dead Peer Detection plus NAT Traversal
Generic Router Encapsulation GRE (RFC 1701)
Internet Key Exchange - IKE V1, V2
|IP transport protocols||Static routing |
IP QoS and traffic prioritization
IP routing over VPN; TCP and UDP
Virtual Redundant Routing Protocol (VRRP)
|Cellular||LTE CAT 4, Bands: 800/900/1800/2100/2600 MHz |
UMTS/HSPA Triple-band 900/1900/2100 MHz
EDGE/GPRS Dual-band 900/1800 MHz
|WiFi||Support for 2.4 and 5 GHz |
Autoselect between 802.11a/b/g/n
WEP or WPA-PSK encryption
|Physical features||LEDs for cell module, system status, network status, and power |
LEDs for LAN/WAN and Cellular signal strength indication
One 10/100 Mbit/s Ethernet RJ-45 (WAN/LAN) - WAN is factory default
One 10/100 Mbit/s Ethernet RJ-45 (LAN)
Two SMA antenna connections for embedded internal cellular radio
Two SMA antenna connections for detachable WiFi antennas
Two Accessible SIM Slots
Optional DIN Rail Clip
|Management||enCloud™ Device Management System |
GUI Web Management
SSH (Secure Shell)
HTTP/HTTPS - web access interface
|Mechanical||Height: 1.6 inches/40 mm |
Width: 5.7 inches/145 mm
Depth: 4 inches/100 mm
Weight: 1 lb. ( 0.45 kg)
|Environmental||Operating: -20 C to +65 C (Extended Temperature Commercial) |
Operating: -30 C to +75 C (Hardened version with metal case)
Storage: -40 C to +85 C
Humidity: 5% to 95%, non-condensing
|Standards compliance||RoHS Compliant |
EMC, FCC Part 15, EN 55011/CISPR II
enCloud™ Device Management System
100 - 240VAC Autoranging, 47-63Hz Power Supply (12V input)
Power Consumption - 3.5 watts nominal, 7 watts transmitting
|Product safety||UL/CSA 60950-1, EN 60950-1 |
CAN/CSA-C22.2 No. 60950-1-03
|Product codes||NUC-EN2000-DS-WIFI Description: Encore EN-2000 Dual SIM 4G Router inc WiFi |
NUC-EN2000-DS-WIFI-H Description: Encore EN-2000 Dual SIM 4G Router inc WiFi (Hardened)
1. Standard Antenna
For office-based installations, the standard supplied antennas are often adequate. If the router is installed in a metal comms cabinet signal can be affected. Consider one of the other optional antennas if the router is installed in a comms cabinet.
2. Optional CMO Antenna
Through-hole surface mount CMO MIMO antenna for routers installed in a secure or waterproof enclosure or comms cabinet. Can be supplied with 0.5m cable to reduce cable loses and maintain the best possible signal.
3. Optional Magnetic Mount Antenna
For sites that have poor 4G coverage we can supply high gain LMO MIMO antenna available with 5m or 10m high quality RF240 antenna cables. Includes wall and pole mounting brackets in the box.
4. Optional LMO Antenna
High gain LMO MIMO antenna available with 5m, 10m or 15m high quality RF240 antenna cables for sites with poor 4G coverage.
SIMPro – IoT’s most powerful SIM Management Platform
Our connectivity management platform provides a single window to securely manage your routers across any network and any number of deployments.
Deploy and manage assets quickly and easily
Optimise costs and pre-empt issues through powerful insights
Automate your connectivity using our powerful APIs
Unified and flexible billing for all business structures
Remote Management System (RMS)
The RUT240 4G/LTE router supports the Teltonika Remote Management System (RMS). A monthly subscription allows you to take control of your router portfolio, monitoring signal levels and device activity through a central management system, lowering your TCO.