The RUTX09 is a next generation 4G/LTE router supporting speeds up to 300Mbps download and 50Mbps upload (LTE-A CAT6). The router also supports failback to DC-HSPA+ technology with up to 42Mbps download and 5.76Mbps upload.
A Quad-core ARM Cortex A7 processor clocked at 717 MHz with 256MB RAM and 256MB flash provide excellent performance and provides ample space for customers to develop their own bespoke IoT applications to run on the router, allowing edge processing of data before transmission to Cloud-based IoT platforms.
The integrated 4-port 10/100/1000 Gigabit Ethernet Switch allows allows wire-speed failover with Gigabit leased-line primary Internet connections.
Larger external 4G antennas can be installed on to the SMA female connectors if required. Please see our related products below for additional antenna options.
Link Resilience with Ping Reboot
The ability for a 4G/LTE router to maintain its’ Internet connection is often over looked, but this ability is essential if the router is going to be installed in unmanned locations or areas where access to equipment is difficult. The Teltonika ‘Ping Reboot’ automatically reboots itself if the router goes offline for a configurable level of time. This feature eliminates the need to visit site to reboot the router if there have been temporary cell mask issues or intermittent levels of network coverage.
The router also supports SMS status and Reboot commands that allow the router to be interrogated for current signal level or rebooted via SMS. These powerful remote diagnostic tools could prevent a site visit by an engineer, lowering maintenance costs.
Features, specification and accessories
- LTE Cat 6 with speeds up to 300Mbps
- 4 x Gigabit Ethernet ports with speeds up to 1000Mbps
- High processing power, Quad Core ARM Cortex A7 717 MHz CPU
- Dual SIM for network resilience in high availability applications
- Teltonika Remote Management System compatible
- Connection watchdog
- 3 alternative internet sources
- Durable aluminium housing
- Wide voltage range (9-50 V)
- External temperature range (-40 +75 °C)
- Multiple VPN options (IPSec, DMVPN, OpenVPN)
- Advanced firewall functionality
Frequency Band support
|4G (LTE-FDD)||B1, B3, B5, B7, B8, B20, B28, B321|
|4G (LTE-TDD)||B38, B40, B41|
|3G||B1, B3, B5, B8|
|Mobile||4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMA|
|CPU||Quad Core ARM Cortex A7 717 MHz CPU|
|Memory||256 MBytes Flash, 256 MBytes DDR3 RAM|
|Ethernet||4 x 1Gbit Ethernet ports: 1 x WAN (configurable as LAN), 3 x LAN|
|Power supply||9 - 50 VDC, 4 pin DC connector|
|PoE (passive)||Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards|
|Connectors||1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 1 x GPS SMA|
|SIM||2 x external SIM holders|
|Status LEDs||1 x Power, 2 x SIM, 3 x Mobile network type, 5 x Signal Strength|
|Operating temperature||-40 ºC to 75 ºC|
|Housing||Full aluminium with grounding terminal|
|Dimensions||115 mm x 95 mm x 44 mm|
|Operating system||RutOS (OpenWrt based Linux OS)|
|SIM switch||2 SIM cards, auto-switch cases: data limit, roaming, no network, network denied, data connection fail|
|Multiple PDN||Possibility to use different PDNs for multiple network access and services|
|Network protocols||TCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, Telnet|
|Networking features||NAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets|
|Unique networking features||VLAN, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto Failover|
|Connection monitoring||Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection|
|Authentication||Pre-shared key, digital certificates, X.509 certificates|
|Keep settings||Update FW without loosing current configuration|
|Monitoring & Management||WEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMS|
|Supported languages||Busybox shell, Lua, C, C++|
|Development tools||SDK package with build environment provided|
1. Standard Antenna
For office-based installations, the standard supplied antennas are often adequate. If the router is installed in a metal comms cabinet signal can be affected. Consider one of the other optional antennas if the router is installed in a comms cabinet.
2. Optional CMO Antenna
Through-hole surface mount CMO MIMO antenna for routers installed in a secure or waterproof enclosure or comms cabinet. Can be supplied with 0.5m cable to reduce cable loses and maintain the best possible signal.
3. Optional Magnetic Mount Antenna
For sites that have poor 4G coverage we can supply high gain LMO MIMO antenna available with 5m or 10m high quality RF240 antenna cables. Includes wall and pole mounting brackets in the box.
4. Optional LMO Antenna
High gain LMO MIMO antenna available with 5m, 10m or 15m high quality RF240 antenna cables for sites with poor 4G coverage.
SIMPro – IoT’s most powerful SIM Management Platform
Our connectivity management platform provides a single window to securely manage your routers across any network and any number of deployments.
Deploy and manage assets quickly and easily
Optimise costs and pre-empt issues through powerful insights
Automate your connectivity using our powerful APIs
Unified and flexible billing for all business structures
Remote Management System (RMS)
The RUT240 4G/LTE router supports the Teltonika Remote Management System (RMS). A monthly subscription allows you to take control of your router portfolio, monitoring signal levels and device activity through a central management system, lowering your TCO.