The RUT950 Dual SIM router combines both 4G & 3G technology with up to 100Mbps download and 50Mbps upload in to a rugged, compact footprint. The integrated 802.11b/g/n Access Point and integrated 4-port 10/100 Ethernet Switch allows the 4G connection to be shared by wired or wireless devices. A simple to use web management GUI with first-time Setup Wizard allows this unit to be configured with ease.
The Teltonika RUT950 is supplied with two 4G stick antennas for good out of the box reception, but larger external antennas can be installed on to its SMA female antenna connectors if required.
Link Resilience with Ping Reboot
The ability for a 4G/LTE router to maintain its Internet connection is often over looked. However, this ability is essential if the router is going to be installed in unmanned locations or areas where access to equipment is difficult. The Teltonika ‘Ping Reboot’ automatically reboots itself if the router goes offline for a configurable level of time. This feature eliminates the need to visit site to reboot the router if there have been temporary cell mask issues or intermittent levels of network coverage.
The router also supports SMS status and Reboot commands that allow the router to be interrogated for current signal level or rebooted via SMS. These powerful remote diagnostic tools could prevent a site visit by an engineer, lowering maintenance costs.
Features, specification and accessories
- LTE Cat 4 with speeds up to 150 Mbps
- 4G Failover – Automatic switching to SIM Backup connection
- Automatic SIM switch
- Wireless Access Point with Hotspot functionality
- Dual SIM for network resilience in high availability applications
- 4 x 10/100 Ethernet ports with VLAN functionality
- Teltonika Remote Management System compatible
- Remote diagnostics via SMS commands
- 3 alternative internet sources
- Supports wide range of industrial networking protocols
- Supports up to 100 WiFi clients
- Connection watchdog
- Multiple VPN options (IPSec, DMVPN, OpenVPN)
- Embedded firewall
Frequency Band support
|4G (LTE-FDD)||B1, B3, B5, B7, B8, B20|
|4G (LTE-TDD)||B38, B40, B41|
|3G||B1, B5, B8|
|Mobile||4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50 Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS|
|CPU||Atheros Wasp, MIPS 74Kc, 550 MHz|
|Memory||16 MBytes Flash, 128 MBytes DDR2 RAM|
|Ethernet||4 x 10/100 Ethernet ports: 1 x WAN (configurable as LAN), 3 x LAN ports|
|Power supply||9 – 30 VDC, 4 pin DC connector|
|PoE (passive)||Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards|
|Inputs/Outputs||1 x Digital Input, 1 x Digital Open Collector Output on power connector|
|Connectors||1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA|
|SIM||2 x external SIM holders|
|Status LEDs||1 x bi-color connection status, 5 x connection strength, 4 x LAN status, 1 x Power|
|Operating temperature||-40 °C to 75 °C|
|Housing||Aluminium housing, plastic panels|
|Dimensions||100 mm x 110 mm x 50 mm|
|Operating system||RutOS (OpenWrt based Linux OS)|
|SIM switch||2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail|
|Multiple PDN||Possibility to use different PDNs for multiple network access and services|
|Network protocols||TCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, Telnet, SNMP|
|Networking features||NAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets|
|Unique networking features||VLAN, Load balancing, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto Failover|
|Connection monitoring||Ping Reboot, Periodic Reboot, Wget Reboot, LCP and ICMP for link inspection|
|Authentication||Pre-shared key, digital certificates, X.509 certificates|
|Keep settings||Update FW without losing current configuration|
|Monitoring & Management||WEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMS|
|Supported languages||Busybox shell, Lua, C, C++|
|Development tools||SDK package with build environment provided|
1. Standard Antenna
For office-based installations, the standard supplied antennas are often adequate. If the router is installed in a metal comms cabinet signal can be affected. Consider one of the other optional antennas if the router is installed in a comms cabinet.
2. Optional CMO Antenna
Through-hole surface mount CMO MIMO antenna for routers installed in a secure or waterproof enclosure or comms cabinet. Can be supplied with 0.5m cable to reduce cable loses and maintain the best possible signal.
3. Optional Magnetic Mount Antenna
For sites that have poor 4G coverage we can supply high gain LMO MIMO antenna available with 5m or 10m high quality RF240 antenna cables. Includes wall and pole mounting brackets in the box.
4. Optional LMO Antenna
High gain LMO MIMO antenna available with 5m, 10m or 15m high quality RF240 antenna cables for sites with poor 4G coverage.
SIMPro – IoT’s most powerful SIM Management Platform
Our connectivity management platform provides a single window to securely manage your routers across any network and any number of deployments.
Deploy and manage assets quickly and easily
Optimise costs and pre-empt issues through powerful insights
Automate your connectivity using our powerful APIs
Unified and flexible billing for all business structures
Remote Management System (RMS)
The RUT240 4G/LTE router supports the Teltonika Remote Management System (RMS). A monthly subscription allows you to take control of your router portfolio, monitoring signal levels and device activity through a central management system, lowering your TCO.